Grouting

About Compaction grouting

Compaction grouting is a ground improvement method which is used to increase the density of the soil. This method of grouting is usually used to rehabilitate settlement of sensitive structures.

Compaction grouting is carried out by injecting stiff mortar-like grout under pressure through cased boreholes to form bulbs, which pushes the surrounding soil to the side and increasing its density. This grouting method is used for treating a wide variety of loose soils, with relatively good drainage, and is performed at depths ranging from 2m, right down to several tens of meters.

The works are carried out from the surface, with the grout bulbs created from the bottom-up in successive stages of 1m. The degree of densification depends on the type of soil treated and the grid pattern selected for the injection points, with injection rates generally varying from 4 to 6m3 per hour, with that reducing to 2m3 per hour in particularly sensitive conditions. Injection pressure is generally in the range of 1 to 4MPa.

Compaction grouting can also be carried out from an existing basement or locations with limited headroom, and it is possible to drill through hard material to reach the low strength strata beneath for treatment.

Key Parameters

The key parameters for compaction grouting are the grid pattern, the injection pressure and the grout take – these determine the performance of grout take.

  • The grid pattern is devised such that each drill hole nominally treats a given area in plan. The grid can be square or triangular and generally makes the distinction between primary and secondary (and sometimes tertiary) holes. The grid is determined by the type of treatment required and the radius of influence.
  • The radius of influence is the distance from the centre of the drill hole to the furthest point at which there is a change of void ratio as a result of the treatment.
  • The injection pressure is dependent on the specific site conditions, such as the presence of buildings, civil engineering structures, open site, treatment depths, etc. The pressure used is prescribed by depth in stages at 1 bar (100KkPa) per meter of depth. This depth is measured from the bottom of the stage.
  • Most compaction grouting is performed using grid patterns of 4 to 9m2 with grout take varying from 2% to 6%. In the particular case of sinkholes, grout takes are highly variable and have been known to be as high as 14%.

Specifications

Specifications for the grout must meet the strict requirements and have the appropriate slump and grading, with the ultimate quality of grout dependant on the condition of the soil being treated. These requirements include that:

  • it must be pumpable
  • it must not cause soil fracturing
  • it must not “bind up” leading to refusal of grout before the injection process is complete.

Get a quote

For more information about Aarsleff Ground Engineering or to send in your enquiry,
call 01636 611140 and speak to an expert member of our team today.

A leading UK ground engineering specialist, focusing on multi-discipline excellence and value engineering. We design and deliver some of the UK’s largest ground engineering projects.

Our vision is to bring confidence to those constructing the landscape of tomorrow .

1947. Central Jutland, Denmark. Per Aarsleff borrowed 10,000 Danish Kroner from his father’s life insurance, bought an excavator, and founded Northern Europe’s leading contracting company.

Our biggest asset, our team is composed of the leading experts in ground engineering. Working with collaboration and cohesion at the core of our business, we can guarantee a quick and founded answer to all your questions.

We recruit and reward our people based on our ‘Step into the Blue’ company culture, where we embrace the core values of Life and Health, Trust, and Responsibility.

We do everything to ensure our team and yours work safely on our sites. With our core value of Life & Health, we see safety as a cultural pillar.

Our ISO accreditations are an assurance to you that we take governance seriously. Read our policies to discover more.

The projects that keep society running. Bridges, buildings, transit and rail facilities, embankment support, marine and offshore facilities, mines, airports, and water projects.

Keeping things turning. Sewage Treatment Works, Waste Water Treatment Works, Wind Farms and Wind Turbines, Biomass Plants, and Power stations.

Meeting society’s needs. Nursing and care homes, MOD buildings, Schools and Universities, and small or large-sized residential developments.

Staying on the move. Remediation, bridges, and foundation work are integral to keeping the industry running smoothly.

The landscape of the marketplace. Mega-retail sheds, distribution warehouses, University accommodation, and major supermarket and household name units.

Keeping things afloat. Ports and harbours, coastal defences, river embankments and inland waterways.

Technically trained estimators and a dedicated, in-house design team means we consider value-engineering at every stage of your project.

More than just a model, Visual Design & Construction is a tool to encourage collaboration and improve quality across all facets of a scheme.

From large commercial sheds to small residential plots, piling could be the foundation solution you need to support your project.

Issues around collapse, slipping or erosion? Our experts in retaining solutions have a broad portfolio of techniques designed to fix even the most nuanced of sites.

Tricky ground conditions or requirements? Aarsleff’s ground engineering team work on stabilisation through a varied range of techniques, bespoke to the properties of your site ground.

Our plant workshop offers a range of services designed to ensure your plant works for you. Whether it’s manufacturing and fabrication of equipment for long-term needs or hire so you can complete something specific.