Smart Solution Generator >>>>

Tag Archives | Underpinning

Mini Piles -Screw/Helical Piles
Screw/Helical Piles are steel shafts with a series of low-pitched circular steel helical plates welded at strategic positions along the shaft. The plates give the foundation both tension and compression bearing capacity which enables them to be used for a…
Aarsleff Mini Piles
Mini bottom-driven piles are efficient and suitable for most ground conditions. Spoil removal is not required – a particular advantage on brownfield sites. A closed-ended thin walled steel tube is driven in lengths of between 2 and 6m using an…
Mini Piles - Sectional Flight Auger (SFA)
Mini Piles – Sectional Flight Auger (SFA) technology is used in low head room or very restricted job sites, where a CFA rig cannot reach. The piles are formed with the use of sectional lengths of hollow stem continuous flight…
Grouting (e.g. jet, consolidation grouting)
Ground Improvement methods such as Grouting are used to improve the existing soil formation by changing the soil properties. They can increase the bearing capacity or provide settlement control for new construction, or to remedy an existing issue. Ground Improvement…
Eddie the Eagle
On the 24th November, Aarsleff Ground Engineering attended the ASUC Awards 2017, held at the Cafe de Paris in London. The event, which included a sparkling drinks reception, delicious three-course meal,  guest speech by Eddie the Eagle and Awards presented…